Versatility
Tenon Scion has been designed to provide the specifier with a readily available
system that combines the natural look and finish of timber with the ease
of installation and relocation of a modern partition system.
Using all timber components for door and glazing frames, a high quality effect
is created. The system can be tailored for use in reception areas, conference
facilities, boardroom's, executive suites or general office areas.
Solid panel elements can be either flush faced for monolithic effect - or
where both relocatibility and attractive feature joints are required, the
panels are pre-vinyled with the wall covering of your choice. A choice of "pencil-line" or
'V' joints is then available.
Adaptability
Double-glazing accommodates 15mm and 25mm Venetian blinds and vertical blinds
within the partition void, with operation via control knobs located within
special posts. Manifestation films may be applied to glazed modules to create
eye-catching designs while also providing compliance with Building Regulations
and maintaining privacy levels.
Scion has been thoroughly tested and assessed over a number of years and offers
30-minute fire resistance to BS 476 part 22. Solid modules with feature joints,
door modules including all configurations of door leaves and glazed modules in
double and single offset glazed formats including insulated
glazing all provide a minimum half hour performance. Standard components can
also be used to achieve 57 minutes glazing and door integrity.
Flexibility
75mm solid panel elements including feature joints, provide sound reduction ratings
of between 37 to 43dB(RW). Standard module size is 1200mm wide and up to 3000mm
high with a system width of either 75mm or 100mm. Standard detailing includes
90°, 135°, 'Y' and three way solid posts suitable for use in all types
of modules. Special non-standard posts are available as part of the Scion design
package.
Timbers are finished with a water-based lacquer but may be stained to meet any
colour scheme requirements.
All fixings are concealed by either shadow line or plastic insert trims that
are colour coded to a choice of RAL colours to match door furniture or corporate
colours.
|
